cufflinks

Careful examination revealed that the initial scan position sensor board (start of page sensor board) interface loose interface to pull out the plug tight. Restart the machine, the fault has disappeared. Retrospective analysis: boot laser component self-test process, the initial scan position sensor board (start the of pflgesengor board) issued the initial scan signal, the signal used to locate the size of the film. Optical control panel (optics control board) does not detect the signal of the initial scan, is an error. Due to the long campaign, leading to the initial scan position sensor interface board loose, resulting in the failure. KODAR8100 fault repair case of failure phenomenon. laser pointer is becoming more and more popular in the current laser pointer market. 500MW Laser
Can also multi-machine connections share a dry laser camera, the film image digitization, quality control is more convenient. Dry laser film is specifically for dry laser camera film, even if all dry-type laser sheet, its structure, performance and imaging principle may be different, but also in the emulsion layer containing silver and does not contain silver. points. Therefore, different types of dry laser film can not mix or substitute each other. KODAK Dry view Dry Laser camera should be noted that in the course of maintenance are summarized as follows: 3.1 Operating ambient temperature 25 ℃, humidity 30% ~ 50% is appropriate to prevent the film adhesion; camera and laser head is the most sensitive parts , pay attention to prevent and avoid frequent switching the camera to protect the laser head. The requirement is towards the parameters and indices of laser pointer.
The above failure to require the operator to maintain the room clean and tidy, the filter should be regularly cleaned and often detected on the transmit power, voltage of 160 laser camera MCS board TP9 general should be (1.6-1.8) V, such as detection of the voltage range is incorrect, to make timely adjustments, so as not to affect the image quality. Washing machine washing machine on image quality, including the developer, fixer, film, the impact of its image quality of temperature control and mechanical transmission parts. Example 1; image gray, contrast, sharpness smaller, comprehensive analysis and inspection identified in the course of their work, fixer-loop obstruction. The customer can choose the suitable laser pointer based on the real needs and actual requirements. Zumba Fitness DVD
Layout to complete the image signal by the control circuit into the laser scanning optical signals required. The laser beam is calibrated by a line scan (from left to right) to form a latent image of the image signal on the film. Film delivery system driven by the high-precision motor control by the servo system to ensure that laser scanning driven by the film uniform in the Y-axis direction to move forward by scanning the area, thus completing the scan of the entire film (printing) process. Film drive control system: the entire transfer process responsible for the film. Automatic washing units: laser camera and automatic washing machine connected to the print to form a latent image after the film into the take-box, directly into the washing machine to wash. The green laser pointer is widely used in many applications.