cufflinks

The online site of the laser gas analyzer contains a transmitter, receiver and electronic unit. Installation, maintenance and calibration via RS 232 and PC computer communications, but also through the MODEM and the PC remote communication. Analyzer service software specially designed to be used to complete all necessary tasks such as setting the output range, the gas temperature and pressure, optical channel length. As the representative and distributor of the Asia-Pacific region, Shenzhen Technology Co., Ltd. or real real technology agents around the country will provide all support services. The scene of the laser gas line analyzer with a rugged design, and is currently the world's most advanced technology. Therefore suitable for high-precision emission measurement and process control applications. Contains the following features. laser stage lighting can be commissioned and adjusted for the customer.
Selected in the step the step width, contour elevation difference. The establishment of the triangular network model. Open the model of point cloud data: in the point cloud data following the establishment of the plane of the front of the plane (refer to the establishment of operations, and introduce a new plane to establish): i click on the right side of the edit bar icon in the lower right the side of the edit box the plane set and attribute charts: ii set cemara mode to the orthogonal mode: At this point, the page will appear the picture of the grid: iii click on the plane to create a button, use the drop-down box option From 2 points , a dialog box will pop up dialog box will appear in the plane name and settings. He should do some warming up practices for Laser Pointers.
In orientation: free, vertical, horizontal, labeled painted by the user plane type: definition of freedom, vertical, horizontal. Turn off the dialog box you can view the location and properties of the plane painted: Click the chart to create a triangular network, select the plane triangulation need to create a triangular network, the maximum and minimum angle and length selected in the dialog box: Note: At this point To select the need to create a point cloud of the triangular network model, if you need to Select All, then click the button, otherwise the system will pop up prompting you do not select the boxes need to create a triangular network. Click triangulate, there will be a triangular model of the point cloud data. Ensure the high performance and effective work of laser stage lighting.
Modern car manufacturing process, on-line detection as an important component of the process being more and more attention. The high degree of automation of CNC coordinate measuring machines and automatic 3D laser detection system used in the body production process, is a characterization. Configuration, the role of the two are clearly different. Contemporary CNC coordinate measuring machine, despite its efficiency and data processing capabilities compared to the product of more than 10 years ago has greatly improved, such as detecting a body frame measurement points over 100 time-consuming only The 0.5h about. However, if 30 samples to determine the operating status of the production process, there must be two classes of workload. The preheating of laser stage lighting is more necessary.
In order to monitor the implementation process more effectively through improved process control and improve product quality, and complement the accurate measurement of the coordinate measuring machine, with high efficiency and a strong laser measurement system for rapid sampling and analysis, have also become an important means of online testing in the modern car body manufacturing. 3D laser detection technology not only in body manufacturing process (including stamping, Tailored Blanks), in a modern car assembly, vehicle assembly process used more and more to produce good results. The 635nm laser beam light of laser stage lighting is more like the pink type.