cufflinks

There are six operating modes, distance, angle, horizontal distance, vertical distance, height of two points, three points a high degree. Serial port, data can be recorded by a computer or data logger. Typical applications: mining topography measurement, forest resources survey, tilt measurement, height measurement, measuring horizontal bar, high measurement tower. Contour XLRic XLRi and GPS, as well as data acquisition combined measure is not easy to achieve the target parameters. Built-in software can calculate the height, tilt, area, perimeter, but not the length of the line, the horizontal distance. XLRic internal digital compass and tilt sensor, the effective instrument of surveying and mapping. The design improvement of cheap Laser Pointers should be discussed.
With Contour XLRic, you can put it your GPS system to connect up to measure the coordinates of the information of those who can not reach or is not easily accessible place, save time and money. Or you can use its built-in software to calculate: tree height, tilt, area, perimeter, space segment, the length of the horizontal distance, height difference data. Due the Contour XLRic configured digital compass and tilt angle measuring instrument, so it can be seen as a handheld Total Station, can assist you in mapping and surveying work. An eye-safe laser rangefinder accurate to you to report the following measurements: distance, orientation, tilt angle. The general range finder in the case of bad weather, measuring the distance often greatly reducing, or even not work. Contour series of laser rangefinders, "bad weather mode" to eliminate this phenomenon. The design of visual fault locator should be done by the technical personnel.
When bad weather conditions, such as: Cloudy, fog, dust, humidity, etc., to start the model, measuring up quickly and as easily measured weather! Mode (function) mode (function) mode, a standard measurement mode: the mode of measurement instrument to be an object between the following spatial data: slope distance, tilt angle and azimuth angle. Model 2 altimetry mode: The aim of the highest and lowest points of the measured object, you can measure the vertical height of the object. Mode 3 3:00 altimetry mode: respectively aimed at the middle of the object point (distance), the highest and lowest points (goniometer), can measure the height of the target. The technical personnel of visual fault locator are in the workshop.
Mode 4 horizontal distance measurement: aimed at the target to be measured, is the horizontal distance (shortest distance) to the target. Mode five slope measurements: an incline of the slope can be measured, or the connection between two points slope. Mode six 3-point method of measuring sag of power lines sagging and sagging distance of: by measuring the power line, three points can be measured. Horizontal distance measurement mode between seven objects: you can measure the horizontal distance between any two objects (the shortest distance mode eight objects the slant range measurement: to measure the distance between any two objects. Mode nine square area measurement: if an area The shape is square, this mode can be used to directly measure the area). It is during the quality analysis of visual fault locator.
The purpose and significance of the research with the rapid development of mechanical, electronic, optical industry, laser measurement system [1] to help solve the problem of diversity and the increasing complexity of new laser system developed, their cost and development time has also continued to increase, while higher and higher demands on the accuracy of the workpiece parameters, the traditional measurement method has been able to achieve the various needs. Some developed countries in the international laser technology [2] The early start and rapid development, which involves all aspects of modern technology, which includes laser diameter measurement. But when the traditional static-contact measurement can not meet the measurement of the analyte. It is during the technology discussion meeting of visual fault locator.